No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH8100 V3 Server LCD V100R003 User Guide 04

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing the Statuses and Alarms of Components

Viewing the Statuses and Alarms of Components

Procedure

  1. On the LCD screen, tap the Status tab.

    The Status tab is displayed, as shown in Figure 4-1.

    Figure 4-1 Status tab

    NOTE:
    • Post Code indicates the status of server port 80.
    • SN indicates the serial number of the server.

    Components are classified into different categories on the Status tab. Tap any component category to enter the component information tab and view the statuses of all components in this category.

  2. Choose a component category as required and view the status information.

    NOTE:

    The status and alarm severity for components are indicated by icons of different colors. For details, see Icon Description in Functions.

    Category

    Description

    Switch

    Switches between the master and slave DVD/VGA/USB in dual-system mode.

    Board

    Contains the statuses and alarms of boards and daughter cards.

    1. Tap Board.

      The Board tab is displayed.

    2. View the statuses and alarms of all boards and daughter cards.

    CPU

    Contains the statuses and alarms of CPUs.

    1. Tap CPU.

      The CPU tab is displayed.

    2. View the statuses and alarms of CPUs.

    Memory

    Contains the statuses and alarms of memory.

    1. Tap Memory.

      The Memory tab is displayed.

    2. View the statuses and alarms of DIMMs.
    3. The memory card MemBrd1 is used as an example. When you tap MemBrd1, the MemBrd1 tab is displayed.
    4. View the statuses and alarms of each DIMM on the memory card.

    HDD

    Contains the statuses and alarms of hard disks.

    1. Tap HDD.

      The HDD tab is displayed.

    2. View the statuses and alarms of hard disks.

    PS

    Contains the statuses and alarms of the power supply units (PSUs).

    1. Tap PS.

      The PS tab is displayed.

    2. View the statuses and alarms of PSUs.

    FAN

    Contains the statuses and alarms of fans.

    1. Tap FAN.

      The FAN tab is displayed.

    2. View the statuses and alarms of fans.

    RAID controller card

    Contains the statuses and alarms of Redundant Array of Independent Disks (RAID) controller cards.

    1. Tap RAID Card.

      The RAID Card tab is displayed.

    2. View the statuses and alarms of RAID controller cards.

    PCIe

    Contains the statuses and alarms of PCIe cards.

    1. Tap PCIe.

      The PCIe tab is displayed.

    2. View the statuses and alarms of PCIe cards.

    TEMP

    Contains the temperatures of each server component.

    1. Tap TEMP.

      The TEMP tab is displayed.

    2. View the alarms for the temperature status of each server component.

      If the component temperature is normal, the following message is displayed on the TEMP tab:

    Device in health state.
    NOTE:

    Tap > to expand the information area to view details about the alarm.

    VRD

    Contains the voltage alarms of the mainboard, hard disk backplane, memory card, and real-time clock (RTC) battery.

    1. Tap VRD.

      The VRD tab is displayed.

      NOTE:

      VRD is an abbreviation for Voltage Regulator Down.

    2. View the voltage alarms of the components.

      If the component voltage is normal, the following message is displayed on the VRD tab:

    Device in health state.
    NOTE:

    Tap > to expand the information area to view details about the alarm.

Download
Updated: 2018-11-23

Document ID: EDOC1000055732

Views: 4410

Downloads: 188

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next