About This Document
Purpose
This document describes the appearance, functions, and structure of the RH8100 V3, and how to install, remove, power on, power off, and configure the RH8100 V3, and perform other common operations on the RH8100 V3.
This document provides guidance for you to manage the RH8100 V3.
Intended Audience
- Technical support engineers
- Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. |
|
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Calls attention to important information, best practices and tips. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Issue |
Date |
Description |
|---|---|---|
35 |
2021-05-26 |
Updated environment specifications. For details, see Technical Specifications. |
34 |
2021-03-30 |
This issue is the thirty-fourth official release. |
33 |
2021-02-25 |
Added operations for replacing the chassis. |
32 |
2020-12-02 |
Added operations for installing and removing the CacheCade key. |
31 |
2020-11-03 |
Updated Product Specifications. |
30 |
2019-12-19 |
This issue is the thirtieth official release. |
29 |
2019-10-15 |
This issue is the twenty-nineth official release. |
28 |
2019-08-05 |
This issue is the twenty-eighth official release. |
27 |
2018-11-20 |
Optimized the document. |
26 |
2018-10-16 |
Added Sensor List. |
25 |
2018-09-03 |
Updated Switching from the Single-system to the Dual-system and Switching from the Dual-system to the Single-system. |
24 |
2018-07-23 |
Added the mapping between CPUs and HFCs. |
23 |
2018-06-13 |
Added Removing the Rear I/O Board and Installing the Rear I/O Board. |
22 |
2018-05-08 |
Updated Connecting a Ground Cable. |
21 |
2018-02-26 |
Updated Logical Structure. |
20 |
2017-11-30 |
Updated Changing an iBMC User Password. |
19 |
2017-08-31 |
Updated Configuring the BIOS. |
18 |
2017-07-20 |
Updated Configuring the BIOS. |
17 |
2017-05-25 |
Updated Technical Specifications. |
16 |
2017-04-22 |
Updated Connecting a Ground Cable. |
15 |
2017-03-17 |
Updated Compute Module. |
14 |
2017-01-20 |
Updated Appearance. |
13 |
2016-11-20 |
Added Product Specifications. |
12 |
2016-10-20 |
|
11 |
2016-10-08 |
Updated Ports. |
10 |
2016-06-01 |
Updated Physical Structure. |
09 |
2016-05-10 |
Updated Appearance. |
08 |
2016-03-29 |
Updated Appearance. |
07 |
2016-01-18 |
Updated Logical Structure. |
06 |
2015-11-10 |
Updated Physical Structure. |
05 |
2015-05-20 |
Combined the RH8100 V3 Server Installation Guide and RH8100 V3 Server Troubleshooting to form the RH8100 V3 Server User Guide. |
04 |
2015-01-08 |
Added a note for PXE configuration in Configuring the BIOS. |
03 |
2014-11-20 |
Added the description of the FM-B in Front I/O Module. |
02 |
2014-10-25 |
Updated Physical Structure. |
01 |
2014-10-15 |
This issue is the first official release. |
