No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Local Telnet User

Configuring a Local Telnet User

# Take AAA authentication as an example. Set the user name and password to admin123 and Huawei@123 respectively.

Ensure that the Telnet function has been enabled before performing this operation.

NOTE:

The following uses the command lines of the S7700 in V200R008C00 as an example.

<HUAWEI> system-view
[HUAWEI] user-interface vty 0
[HUAWEI-ui-vty0] protocol inbound telnet   //By default, switches in V200R006 and earlier versions support Telnet, and switches in V200R007 and later versions support SSH.
[HUAWEI-ui-vty0] authentication-mode aaa
[HUAWEI-ui-vty0] quit
[HUAWEI] aaa
[HUAWEI-aaa] local-user admin123 password irreversible-cipher Huawei@123
[HUAWEI-aaa] local-user admin123 service-type telnet
[HUAWEI-aaa] local-user admin123 privilege level 15
[HUAWEI-aaa] return
<HUAWEI> save
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 84691

Downloads: 12114

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next