No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Screen Display

Setting Screen Display

Run the screen-length screen-length [ temporary ] command in the user view or user interface view to set the number of rows to be displayed on a screen. The parameter temporary is mandatory when you run this command in the user view and specifies the number of rows to be temporarily displayed on a terminal screen. The default number of rows is 24.

In V200R005 and earlier versions, run the screen-width screen-length command in any view to set the number of columns to be displayed on the screen. The default number of columns is 80. Each character is a column. In versions after V200R005, the number of columns displayed on a terminal screen cannot be set using this command. The device automatically adjusts the number of columns displayed on a terminal screen.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 85064

Downloads: 12115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next