No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing a Stack Member Port

Changing a Stack Member Port

Change the stack member port XGE0/0/1 in stack-port0/1 to XGE0/0/3.

Versions later than V200R002

<HUAWEI> system-view
[HUAWEI] interface stack-port 0/1  
[HUAWEI-stack-port0/1] shutdown interface xgigabitethernet0/0/1  //Set the stack member port to Down to prevent loops.
[HUAWEI-stack-port0/1] undo port interface xgigabitethernet0/0/1 enable   //Remove the stack member port XGE0/0/1 from the stack port to restore the member port to a service port.
[HUAWEI-stack-port0/1] port interface xgigabitethernet0/0/3 enable   //Configure XGE0/0/3 as a stack member port.

V200R002 and earlier versions

<HUAWEI> system-view
[HUAWEI] interface stack-port 0/1  
[HUAWEI-stack-port0/1] undo port member-group interface xgigabitethernet 0/0/1  //Delete the previous stack member port.
[HUAWEI-stack-port0/1] quit  
[HUAWEI] undo stack port interface xgigabitethernet 0/0/1 enable  //Restore the stack member port to a service port.
[HUAWEI] stack port interface xgigabitethernet 0/0/3 enable  //Configure XGE0/0/3 as a stack member port.
[HUAWEI] interface stack-port 0/1  
[HUAWEI-stack-port0/1] port member-group interface xgigabitethernet 0/0/3  //Add XGE0/0/3 to the stack port.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 91174

Downloads: 12230

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next