No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Device Serial Number

Displaying the Device Serial Number

Each device has a unique equipment serial number (ESN). When you require technical assistance or need to apply for a license, you need to provide the device's ESN.

# Run the display esn command to view the ESN of a device. The following example shows the display esn command output of a modular switch. The command output varies according to device models.

<HUAWEI> display esn
ESN of master:77000601xxxxxxxx
ESN of slave:77000601xxxxxxxx
NOTE:
  • All models of modular switches support this command.
  • The S2750EI, S5700LI, S5700S-LI, and S5720EI of fixed switches do not support this command.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 85042

Downloads: 12115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next