No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Patch Information of the Device

Displaying Patch Information of the Device

# Run the display patch-information command to view patch information of the device. The following example shows the display patch-information command output of a modular switch. The command output varies according to device models.

<HUAWEI> display patch-information
Patch Package Name   :cfcard:/patch.pat
Patch Package Version:V200R008C00SPH001
The state of the patch state file is: Running
The current state is: Running

*           Information about hot patch errors is as follows:          *

     Slot            CurrentVersion

No hot patch error occurs on any board.

*                The hot patch information, as follows:                *

 Slot       Type           State     Count Time(YYYY-MM-DD HH:MM:SS)
 14         C              Running   1     2012-08-15 09:20:48+00:00 
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 123406

Downloads: 13192

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next