No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an Observing Port

Configuring an Observing Port

A physical port must be configured as an observing port before the mirroring function is configured. You can configure a single observing port or multiple observing ports in a batch. Observing ports configured in a batch are added to an observing port group. After a mirrored port is configured, the mirrored port is bound to the observing port group. Therefore, such batch configuration is usually performed in 1:N mirroring to simplify the configuration.

Configuring a Single Observing Port

  • Configure a local observing port, which directly connects to a monitoring device.

    <HUAWEI> system-view
    [HUAWEI] observe-port 1 interface gigabitethernet 1/0/1
  • Configure a Layer 2 remote observing port, which forwards mirroring packets to a monitoring device across a Layer 2 network.

    <HUAWEI> system-view
    [HUAWEI] observe-port 1 interface gigabitethernet 1/0/1 vlan 10

Configure Observing Ports in a Batch (only in V200R005 and Later Versions)

  • Configure local observing ports in a batch, which directly connect to monitoring devices.

    <HUAWEI> system-view
    [HUAWEI] observe-port 1 interface-range gigabitethernet 1/0/1 to gigabitEthernet 1/0/3
  • Configure Layer 2 remote observing ports, which forward mirroring packets to monitoring devices across a Layer 2 network.

    <HUAWEI> system-view
    [HUAWEI] observe-port 1 interface-range gigabitethernet 1/0/1 to gigabitEthernet 1/0/3 vlan 10
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 84796

Downloads: 12115

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next