No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Obtaining the MAC Address of a Device Based on the IP Address

Obtaining the MAC Address of a Device Based on the IP Address

# Run the display arp | include ip-address command to obtain the MAC address of the device based on the IP address.

For example, obtain the MAC address of the device based on the IP address of 192.168.150.20.

<HUAWEI> display arp | include 192.168.150.20
IP ADDRESS      MAC ADDRESS     EXPIRE(M) TYPE        INTERFACE   VPN-INSTANCE                                                      
                                          VLAN/CEVLAN                                                                               
------------------------------------------------------------------------------                                                       
192.168.150.20  000b-0935-766f  10        D-1         GE1/0/24                                                                             
------------------------------------------------------------------------------                                                      
Total:27        Dynamic:26      Static:0     Interface:1
NOTE:
  • If the entry is empty, the MAC address of the device cannot be obtained based on the IP address.
  • If the parameter following include specifies the MAC address, the IP address of the device can be obtained based on the MAC address.
  • The command output on your device may differ from that provided in this example.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 89583

Downloads: 12194

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next