No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Static MAC Address

Configuring a Static MAC Address

Configure the MAC address of the fixed upstream device or trusted user host connected to the switch as the static MAC address to ensure secure communication.

<HUAWEI> system-view
[HUAWEI] vlan 10  //Create VLAN 10.
[HUAWEI-vlan10] quit
[HUAWEI] interface GigabitEthernet1/0/1
[HUAWEI-GigabitEthernet1/0/1] port link-type access
[HUAWEI-GigabitEthernet1/0/1] port default vlan 10  //Add an interface to VLAN 10.
[HUAWEI-GigabitEthernet1/0/1] quit
[HUAWEI] mac-address static 0000-0012-0034 GigabitEthernet1/0/1 vlan 10  //Create a static MAC address and bind the MAC address of 0000-0012-0034 to the GigabitEthernet1/0/1.
NOTE:

The interface bound to the MAC address must belong to the specified VLAN and the VLAN must have been created.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 84716

Downloads: 12114

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next