No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying and Setting the Aging Time of MAC Addresses

Displaying and Setting the Aging Time of MAC Addresses

# In the system view, run the mac-address aging-time 600 command to set the aging time of dynamic MAC addresses to 600s. By default, the aging time is 300s.
<HUAWEI> system-view
[HUAWEI] mac-address aging-time 600
# In any view, run the display mac-address aging-time command to view the aging time of dynamic MAC addresses.
<HUAWEI> display mac-address aging-time
  Aging time: 300 second(s)
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 122308

Downloads: 13174

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next