No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Duplex Mode

Configuring the Duplex Mode

Configuring the Duplex Mode for an Interface in Auto-Negotiation Mode

# Set the duplex mode to full-duplex for Ethernet electrical interface GE1/0/1 working in auto-negotiation mode.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] negotiation auto
[HUAWEI-GigabitEthernet1/0/1] auto duplex full

Configuring the Duplex Mode for an Interface in Non-Auto-Negotiation Mode

# Set the duplex mode to half-duplex for Ethernet electrical interface GE1/0/1 working in non-auto-negotiation mode.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] undo negotiation auto
[HUAWEI-GigabitEthernet1/0/1] duplex half
NOTE:
  • Physical interfaces of the S5720EI, S5720HI, S6700EI, S6720EI, S6720HI, and S6720S-EI do not support the half duplex mode.
  • Physical interfaces of the X series cards on a modular switch do not support the duplex mode configuration. On other cards, only the GE electrical interface and FE electrical interface support the half duplex mode.
  • When the working rate of a GE electrical interface is 1000 Mbit/s, the interface do not support the half duplex mode.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 90136

Downloads: 12210

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next