No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a Specified Member Interface from an Eth-Trunk

Deleting a Specified Member Interface from an Eth-Trunk

You can use either of the following methods to delete a specified member interface from an Eth-Trunk:

  • Run the undo trunkport interface-type { interface-number1 [ to interface-number2 ] } &<1-8> command in the Eth-Trunk view to delete a specified member interface from an Eth-Trunk.

    <HUAWEI> system-view
    [HUAWEI] interface eth-trunk 1
    [HUAWEI-Eth-Trunk1] undo trunkport gigabitethernet 1/0/1
  • Run the undo eth-trunk command in the member interface view to delete a specified member interface from an Eth-Trunk.

    <HUAWEI> system-view
    [HUAWEI] interface gigabitethernet 1/0/1
    [HUAWEI-GigabitEthernet1/0/1] undo eth-trunk
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 91228

Downloads: 12230

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next