No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Information About Eth-Trunk Member Interfaces

Displaying Information About Eth-Trunk Member Interfaces

# Display information about member interfaces of Eth-Trunk 2.

<HUAWEI> display trunkmembership eth-trunk 2
Trunk ID: 2
Used status: VALID
TYPE: ethernet
Working Mode : Normal
Number Of Ports in Trunk = 2
Number Of Up Ports in Trunk = 2
Operate status: up
Interface GigabitEthernet1/0/1, valid, operate up, weight=1
Interface GigabitEthernet1/0/2, valid, operate up, weight=1
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 123456

Downloads: 13195

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next