No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a VLAN or VLANs in a Batch

Deleting a VLAN or VLANs in a Batch

The device supports deletion of a single VLAN or VLANs in a batch.

  • Delete VLAN 10.
    <HUAWEI> system-view
    [HUAWEI] undo vlan 10
  • Delete VLAN 10 to VLAN 20 in a batch.
    <HUAWEI> system-view
    [HUAWEI] undo vlan batch 10 to 20

The earlier versions of V200R005, before deleting a VLAN where a VLANIF interface has been configured, run the undo interface vlanif command to delete the VLANIF interface.

Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 123391

Downloads: 13192

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next