No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting the Selective QinQ Configuration

Deleting the Selective QinQ Configuration

# Delete all the selective QinQ configuration of an interface.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] undo port vlan-stacking all

# Delete the configuration of an inner VLAN in selective QinQ.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] undo port vlan-stacking vlan 3 stack-vlan 10   //Delete the selective QinQ configuration with VLAN 3 in the inner tag.
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 89865

Downloads: 12200

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next