No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling STP/RSTP

Disabling STP/RSTP

Disabling STP/RSTP Globally

Run the undo stp enable command in the system view.

<HUAWEI> system-view
[HUAWEI] undo stp enable

Disabling STP/RSTP on an Interface

Run the undo stp enable command in the interface view.

<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 1/0/1
[HUAWEI-GigabitEthernet1/0/1] undo stp enable
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 89800

Downloads: 12200

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next