No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Conflicting Addresses

Clearing Conflicting Addresses

Clear conflicting addresses in the address pool on a device functioning as a DHCP server. The conflicting addresses then can be used. For example, clear the conflicting IP addresses in the global address pool pool1 or interface address pool VLANIF100.

The clients with conflicting addresses need to be reconnected to obtain new IP addresses.
  • Configuration in the global address pool:

    <HUAWEI> reset ip pool name pool1 conflict
  • Configuration in the interface address pool:

    <HUAWEI> reset ip pool interface vlanif100 conflict
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 123389

Downloads: 13192

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next