No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting ACL and ACL6

Deleting ACL and ACL6

You do not need to delete the service configurations before using these commands to delete an ACL or ACL6. These commands will delete an ACL or ACL6 regardless of whether it is applied to a service module.

  • To delete an ACL, run the undo acl { [ number ] acl-number | all } or undo acl name acl-name command in the system view.

  • To delete an ACL6, run the undo acl ipv6 { all | [ number ] acl6-number } or undo acl ipv6 name acl6-name command in the system view.

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 91064

Downloads: 12226

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next