No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Packet Filtering Rule for ICMP Protocol Packets Based on Source IP Address (Host Address) and Destination IP Address Segment

Configuring a Packet Filtering Rule for ICMP Protocol Packets Based on Source IP Address (Host Address) and Destination IP Address Segment

To allow ICMP packets from a host that are destined for a network segment to pass, configure a rule in an ACL. For example, to allow ICMP packets from the host at 192.168.1.3 that are destined for the network segment 192.168.2.0/24 to pass, configure the following rule in ACL 3001.
<HUAWEI> system-view
[HUAWEI] acl 3001
[HUAWEI-acl-adv-3001] rule permit icmp source 192.168.1.3 0 destination 192.168.2.0 0.0.0.255

Related Information

Support Community

Videos

Configure ACL

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 89817

Downloads: 12200

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next