No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Interface-based Rate Limiting on Fixed Switches

Configuring Interface-based Rate Limiting on Fixed Switches

Configuring Interface-based Rate Limiting in the Inbound Direction

Run the qos lr inbound cir cir-value [ cbs cbs-value ] command in the interface view to limit the rate of traffic passing through the interface.

Configuring Interface-based Rate Limiting in the Outbound Direction

Run the qos lr outbound cir cir-value [ cbs cbs-value ] command in the interface view to limit the rate of traffic passing through the interface.

(Optional) Configuring the Inter-frame Gap and Preamble

In V200R005C00 and later versions, you can configure the switch whether to calculate the inter-frame gap and preamble of packets during rate limit calculation on the interface. By default, the switch calculates the inter-frame gap and preamble of packets when the device calculates the rate limit. You can run either of the following commands in the system view to configure the device to not calculate the inter-frame gap and preamble of packets during rate limit calculation, to improve rate limit accuracy.
  • Inbound: qos-car exclude-interframe
  • Outbound: qos-shaping exclude-interframe

Relevant Information

Video

Configure Interface-based Rate Limiting

Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 84506

Downloads: 12107

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next