No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Guest VLAN Function

Configuring the Guest VLAN Function

You can configure the guest VLAN function to enable users to access some network resources without authentication. For example, the users can download client software, upgrade clients, and update the virus library. For example, configure the guest VLAN function on GE1/0/1 and GE1/0/5 so that the users on the two interfaces can update the virus library in real time. Assume that the virus library server is located in VLAN 10.

NOTE:

In the V200R005C00 and later versions, only the common NAC mode supports the guest VLAN function.

  • Batch configure multiple interfaces in the system view:
    <HUAWEI> system-view
    [HUAWEI] dot1x enable
    [HUAWEI] dot1x enable interface gigabitethernet 1/0/1 gigabitethernet 1/0/5
    [HUAWEI] authentication guest-vlan 10 interface gigabitethernet 1/0/1 gigabitethernet 1/0/5
  • Configure each interface in the interface view:
    <HUAWEI> system-view
    [HUAWEI] dot1x enable
    [HUAWEI] interface gigabitethernet 1/0/1
    [HUAWEI-GigabitEthernet1/0/1] dot1x enable
    [HUAWEI-GigabitEthernet1/0/1] authentication guest-vlan 10
    [HUAWEI-GigabitEthernet1/0/1] quit
    [HUAWEI] interface gigabitethernet 1/0/5
    [HUAWEI-GigabitEthernet1/0/5] dot1x enable
    [HUAWEI-GigabitEthernet1/0/5] authentication guest-vlan 10
    
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 84097

Downloads: 12095

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next