No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Association Between VRRP and BFD

Configuring Association Between VRRP and BFD

# Configure association between VRRP and BFD to implement a rapid active/standby switchover.

<HUAWEI> system-view
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] ip address 24
[HUAWEI-Vlanif10] vrrp vrid 1 virtual-ip
[HUAWEI-Vlanif10] quit
[HUAWEI] bfd
[HUAWEI-bfd] quit
[HUAWEI] bfd atob bind peer-ip interface vlanif 10
[HUAWEI-bfd-session-atob] discriminator local 1
[HUAWEI-bfd-session-atob] discriminator remote 2
[HUAWEI-bfd-session-atob] min-rx-interval 100
[HUAWEI-bfd-session-atob] min-tx-interval 100
[HUAWEI-bfd-session-atob] commit
[HUAWEI-bfd-session-atob] quit
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] vrrp vrid 1 track bfd-session 1 increased 40
[HUAWEI-Vlanif10] quit
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 89037

Downloads: 12189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next