No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Association Between VRRP and NQA

Configuring Association Between VRRP and NQA

# Configure association between VRRP and NQA to implement an active/standby switchover.

<HUAWEI> system-view
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] ip address 24
[HUAWEI-Vlanif10] vrrp vrid 1 virtual-ip
[HUAWEI-Vlanif10] quit
[HUAWEI] nqa test-instance user test
[HUAWEI-nqa-user-test] test-type icmp
[HUAWEI-nqa-user-test] destination-address ipv4
[HUAWEI-nqa-user-test] frequency 15
[HUAWEI-nqa-user-test] start now
[HUAWEI-nqa-user-test] quit
[HUAWEI] interface vlanif 10
[HUAWEI-Vlanif10] vrrp vrid 1 track nqa user test reduced 40
[HUAWEI-Vlanif10] quit
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 123439

Downloads: 13195

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next