No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S1720, S2700, S3700, S5700, S6700, S7700, and S9700 Series Switches Common Operation Guide

This document describes the CLI-based configurations of universal protocols and common features for Huawei switches on basic networks.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling or Disabling the Trap Function for a Specified Module

Enabling or Disabling the Trap Function for a Specified Module

Requirement Command
Enable the trap function for all modules at a time. snmp-agent trap enable
Disable the trap function for all modules at a time. snmp-agent trap disable
Enable all traps for the specified module. snmp-agent trap enable feature-name
Disable all traps for the specified module. undo snmp-agent trap enable feature-name
Enable the specified trap function for the specified module. snmp-agent trap enable feature-name feature-name trap-name trap-name
Disable the specified trap function for the specified module. undo snmp-agent trap enable feature-name feature-name trap-name trap-name
Restore traps of all modules to the default status at a time. undo snmp-agent trap disable or undo snmp-agent trap enable
NOTE:

To check the status of the trap for the specified module, see Checking Whether Traps of a Module Are Enabled.

# Enable all traps for the ARP module.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name arp

# Enable all traps for the DHCP module.

<HUAWEI> system-view
[HUAWEI] snmp-agent trap enable feature-name dhcp
Translation
Download
Updated: 2018-09-03

Document ID: EDOC1000057410

Views: 91223

Downloads: 12230

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next