No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (Earlier Than V250) User Guide 31

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the DNS on the iBMC WebUI

Configuring the DNS on the iBMC WebUI


Configure the domain name system (DNS) on Configure > Network Settings of the iBMC WebUI.

The DNS is a distributed database that stores the mapping between domain names and IP addresses. It enables users to access the network using easily memorized domain names instead of numerical IP addresses.



  • iBMC host name
  • IP addresses and domain name of the DNS servers


  1. Log in to the iBMC WebUI.
  2. Choose Configure > Network Settings.
  3. In the Set iBMC Host Name area, enter the iBMC host name, for example, huawei in Server Name.
  4. Click Save.
  5. In the Set DNS area, select Manually set DNS address.
  6. Set the DNS address.
    1. In Domain, enter the DNS server domain name, for example,
    2. In Preferred Server, enter the IP address of the preferred DNS server, for example,
    3. In Alternate Server, enter the IP address of the alternate DNS server.
    4. Click Save.
  7. On the PC used to connect to the iBMC, set the DNS server addresses.

    Ensure that the same DNS addresses are set on the PC and the iBMC.

  8. Use the domain name address to log in to the iBMC WebUI.


    A domain name address consists of the host name and domain name. For example, if the host name is huawei and the domain name is, the domain name address is

    Open the browser of the PC, enter the domain name address, for example, in the address box, and press Enter.

Updated: 2019-08-01

Document ID: EDOC1000058833

Views: 219397

Downloads: 1936

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next