No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Pro E9000 Server iBMC (Earlier Than V250) User Guide 31

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Credentials

Default Credentials

Table 5-1 lists the default credentials for the iBMC. The default credentials are used for first login or login after you restore the iBMC to factory settings. For security purposes, change the default password at the first login and change your password periodically.

Table 5-1 Default credentials


Default Value

iBMC user name and password

User name: root

Password: Huawei12#$

iBMC management port IP address


U-Boot password


SNMP read-only community name


SNMP read-write community name


Trap community name


Updated: 2019-08-01

Document ID: EDOC1000058833

Views: 220030

Downloads: 1936

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next