No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Pro E9000 Server iBMC (Earlier Than V250) User Guide 31

This document describes the underlying management software Intelligent Baseboard Management Controller (iBMC) of the servers.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CLI Overview

CLI Overview

Syntax

The iBMC commands can be classified into two types:

  • Query command ipmcget

    Syntax:

    ipmcget [-t target] -d dataitem [-v value]

  • Set command ipmcset

    Syntax:

    ipmcset [-t target] -d dataitem [-v value]

The parameters of ipmcget and ipmcset are described as follows:

  • [ ]: includes optional parameter of a command.

  • -t target: indicates the object to be queried or set.

  • -d dataitem: indicates the specific properties of the object to be queried or set.

  • -v value: indicates a parameter value of the object.

Table 2-65 lists the conventions for the command line formats.

Table 2-65 Conventions for the command line formats

Format

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One or no item can be selected.

{ x | y | ... }*

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ]*

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

Help

The iBMC CLI provides information about how to use the commands. To obtain help information, enter part of a command and press Enter.

Examples:

Query command:

iBMC:/->ipmcget
Usage: ipmcget [-t target] -d dataitem [-v value]
    -t <target>
       fru0                          Get the information of the fru0                   
       sensor                        Print detailed sensor information                 
       smbios                        Get the information of smbios                     
       trap                          Get SNMP trap status                              
       service                       Get service information                           
       maintenance                   Get maintenance information                       
       syslog                        Get syslog status                                 
       user                          Get the information of user                       
       securitybanner                Get login security banner information             
       storage                       Get storage device information             
       config                        Get configuration information              
       vmm                           Get virtual media information                    
       certificate                   Get SSL certificate information  

    -d <dataitem>
       port80                        Get the diagnose code of port 80                  
       diaginfo                      Get diagnostic info of management subsystem       
       systemcom                     Get system com data                               
       blackbox                      Get black box data                                
       bootdevice                    Get boot device                                   
       shutdowntimeout               Get graceful shutdown timeout state and value     
       powerstate                    Get power state                                   
       health                        Get health status                                 
       healthevents                  Get health events                                 
       sel                           Print System Event Log (SEL)                      
       operatelog                    Print operation log                               
       version                       Get iBMC version                                  
       serialnumber                  Get system serial number                          
       userlist                      List all user info                                
       fruinfo                       Get fru information                               
       time                          Get system time                                   
       macaddr                       Get mac address                                   
       serialdir                     Get currently connected serial direction          
       rollbackstatus                Get rollback status                               
       passwordcomplexity            Get password complexity check enable status       
       ledinfo                       Get led information                               
       ipinfo                        Get ip information                                
       chassisnum                    Get Chassis Number                                
       raid                          Deprecated. Please use 'ipmcget -t storage ...' to get more inforamtion
       ldinfo                        Deprecated. Please use 'ipmcget -t storage ...' to get more inforamtion
       pdinfo                        Deprecated. Please use 'ipmcget -t storage ...' to get more inforamtion
       minimumpasswordage            Get minimum password age configuration     
       ntpinfo                       Get NTP information      

Set command:

iBMC:/->ipmcset
Usage: ipmcset [-t target] -d dataitem [-v value]
    -t <target>
       fru0                          Operate with fru0                                 
       trap                          Operate SNMP trap                                 
       service                       Operate with service                              
       user                          Operate with user                                 
       maintenance                   Operate with maintenance                          
       sensor                        Operate with sensor                               
       securitybanner                Operate login security banner information         
       syslog                        Operate syslog                                    
       ntp                           Operate ntp                                       
       storage                       Configure storage device                          
       config                        Operate configuration                             
       vmm                           Operate virtual media                     
       certificate                   Operate certificate

    -d <dataitem>
       reset                         Reboot iBMC system                                
       identify                      Operate identify led                              
       upgrade                       Upgrade component                                 
       clearcmos                     Clear CMOS                                        
       bootdevice                    Set boot device                                   
       shutdowntimeout               Set graceful shutdown timeout state and value     
       frucontrol                    Fru control                                       
       powerstate                    Set power state                                   
       sel                           Clear SEL                                         
       adduser                       Add user                                          
       password                      Modify user password                              
       deluser                       Delete user                                       
       privilege                     Set user privilege                                
       serialdir                     Set serial direction                              
       printscreen                   Print current screen to iBMC                      
       rollback                      Perform a manual rollback                         
       passwordcomplexity            Set password complexity check enable state        
       ipaddr                        Set ip address
       ipconfig                      Set ip address mask gateway
       ipmode                        Set ip mode
       gateway                       Set gateway
       ipaddr6                       Set ipv6 address
       ipmode6                       Set ipv6 mode
       gateway6                      Set ipv6 gateway
       ipv6config                    Set ipv6 fix gateway
       restore                       Restore factory setting                           
       notimeout                     Set no timeout state                              
       emergencyuser                 Set emergency user                                
       workkey                       Update system workkey                             
       minimumpasswordage            Set minimum password age configuration            
       locate                        Deprecated. Please use 'ipmcset -t storage ...'.

If an incorrect parameter is entered, help information will be displayed listing all possible parameters.

The following is an example:

iBMC:/->ipmcset -d inff
Input parameter[-d] error
    -d <dataitem>
       reset                         Reboot iBMC system                                
       identify                      Operate identify led                              
       upgrade                       Upgrade component                                 
       clearcmos                     Clear CMOS                                        
       bootdevice                    Set boot device                                   
       shutdowntimeout               Set graceful shutdown timeout state and value     
       frucontrol                    Fru control                                       
       powerstate                    Set power state                                   
       sel                           Clear SEL                                         
       adduser                       Add user                                          
       password                      Modify user password                              
       deluser                       Delete user                                       
       privilege                     Set user privilege                                
       serialdir                     Set serial direction                              
       printscreen                   Print current screen to iBMC                      
       rollback                      Perform a manual rollback                         
       passwordcomplexity            Set password complexity check enable state        
       ipaddr                        Set ip address
       ipconfig                      Set ip address mask gateway
       ipmode                        Set ip mode
       gateway                       Set gateway
       ipaddr6                       Set ipv6 address
       ipmode6                       Set ipv6 mode
       gateway6                      Set ipv6 gateway
       ipv6config                    Set ipv6 fix gateway
       restore                       Restore factory setting                           
       notimeout                     Set no timeout state                              
       emergencyuser                 Set emergency user                                
       workkey                       Update system workkey                             
       minimumpasswordage            Set minimum password age configuration            
       locate                        Deprecated. Please use 'ipmcset -t storage ...'.
Translation
Download
Updated: 2019-08-01

Document ID: EDOC1000058833

Views: 219937

Downloads: 1936

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next