No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

LUN Copy Feature Guide 06

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R002

"This document describes the principles and application scenarios of LUN copy, and how to configure and manage LUN copy."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verification

Verification

This section describes how to check whether a full LUN copy task is successful by verifying the integrity of replicated data.

Procedure

  1. Check whether the LUN copy task is successful.
    1. Operation path: > LUN Copy.
    2. Select the LUN copy you want to view and check its LUN data status.
      • If the status is Completed, the LUN copy task is successful.
      • If the status is Copying, the LUN copy task is ongoing. Wait until the task is finished.
  2. Map the target LUN to the host.
    1. Create a LUN group, add the target LUN LUN_BK into it.

      Operation path: > LUN > LUN Group > Create.

    2. Create a host group, add the host in the target device into it.

      Operation path: > Host > Host Group > Create.

    3. Create a mapping view and map the target LUN group of the LUN copy to the host group in the target device.

      Operation path: > Mapping View > Create.

  3. Scan for the LUN group on the host. After detecting the target LUN, check whether its data is consistent with the source LUN data.

    • If yes, the LUN copy task has successfully migrated data to the target device.
    • If no, check whether the configuration operations are correct.

Translation
Download
Updated: 2019-01-28

Document ID: EDOC1000059442

Views: 6879

Downloads: 159

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next