No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

LUN Copy Feature Guide 06

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R002

"This document describes the principles and application scenarios of LUN copy, and how to configure and manage LUN copy."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying Basic Information About a LUN Copy

Modifying Basic Information About a LUN Copy

This operation enables you to modify the properties of a LUN copy.

Prerequisites

  • At least one LUN copy has been created on the storage system.
  • The Health Status of the LUN copy that you want to modify is Normal.

Procedure

  1. Go to the Properties of LUN Copy dialog box.
    1. On the right navigation bar, click .
    2. In the function pane on the left, click LUN Copy.

      The LUN copy management page is displayed.

    3. Select the LUN copy that you want to modify and click Properties on the menu bar.

      The Properties of LUN Copy dialog box is displayed.

      NOTE:
      You can also go to the Properties of LUN Copy dialog box by right-clicking the LUN copy and choosing Properties.

  2. Modify the general information about the LUN copy.
    1. Click the General tab.
    2. Modify the properties of the LUN copy. Table 3-7 describes related parameters.

      Table 3-7  LUN copy parameters

      Parameter

      Description

      Value

      Name

      Name of the LUN copy.

      Name a LUN in accordance with the associated value range so that the LUN is available to host applications.

      [Value range]
      • The name must be unique.
      • The name can contain only letters, digits, periods (.), underscores (_), and hyphens (-).
      • The name contains 1 to 31 characters.

      [Example]

      LUNCopy_11

      Description

      Description of the LUN copy.

      [Example]

      None

      Copy Speed

      Rate of a LUN copy, Low, Medium, High, or Highest.

      [Default value]

      Medium

      [Example]

      Medium

    3. Click OK.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    4. Click Close.

      The LUN copy management page is displayed.

Translation
Download
Updated: 2019-01-28

Document ID: EDOC1000059442

Views: 6901

Downloads: 159

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next