Troubleshooting Cases for STA Experience Issues
- Case Study: STAs Encounter Weak Signals or Go Offline Because of the Improper Transmit Power Planning for Properly Deployed APs
- Case Study: Severe Service Suspension Occurs on STAs Due to Improper Channel Planning
- Case Study: Wi-Fi Experience Is Poor When APs Are Installed Too Densely or Sparsely
- Case Study: AP Installation Positions Are Blocked by Obstacles, Causing Weak Signals for STAs
- Case Study: Wi-Fi Cannot Be Used Due to Other Interference in the Installation Environment
- Case Study: STAs Encounter Weak Signals or No Signals in the Coverage Area Due to Incorrect Antenna Selection
- Case Study: STAs Encounter Weak Signals in the Coverage Area Due to Incorrect Installation Directions of Antennas
- Case Study: STAs Encounter Weak Signals in the Coverage Area Due to Insufficient Antenna Power
- Case Study: A STA Prefers Channels 1 to 11 and Does Not Associate with or Roam to the Nearest AP
- Case Study: Mobile Phones Running HarmonyOS Do Not Roam Because Huawei's Proprietary 802.11r Is Disabled
- Case Study: Layer 3 Roaming Fails Because a STA Fails to Obtain an IP Address
- Case Study: A PDA Goes Offline During Roaming Due to Poor Wireless Signal Coverage
- Case Study: A PDA Goes Offline During Roaming Due to Low Roaming Sensitivity
- Case Study: Frame Freezing Occurs in a Tencent Video Conference Due to Network Adapter Compatibility Issues or Wired-Side Link Exceptions
- Case Study: A STA Enters the Power-Saving Mode, Leading to a High Delay
- Case Study: Wired Users Can Connect to Printers but Wireless Users Cannot
- Case Study: The WIDS Containment Effect Is Poor