Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Cannot Authorized Neighbors Be Detected After Radio Calibration Is Enabled?
Perform the following operation to locate the cause:
- In versions earlier than V200R006, check whether the AC ID and carrier ID are configured on the AC and commit the configuration. In V200R006 and later versions, the configuration model does not include the AC ID or carrier ID.
- Check whether neighbor detection messages are delivered, whether APs report neighbor information, and whether the AC correctly stores received neighbor information.