Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Did STA Fail to Search 802.11n Signals After the AP Is Enabled with 802.11n?
This is because the IEEE 802.11n draft protocol does not support a high throughput rate of the WEP or TKIP unicast ciphers. If the STA uses the WEP or WPA-TKIP encryption mode, the data transmission rate will decrease to 54 Mbit/s. In WEP or TKIP mode, if the STA uses the 802.11b/g/n NIC to associate with APs, it can only be associated with 802.11g APs. As a result, the displayed signal transmission rate is 54 Mbit/s but not the 802.11n rate. This is restricted by the IEEE 802.11 standard.