Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Troubleshooting Cases for Hardware Faults
- Case Study: No Loads Are Installed on Idle Antenna Ports, Affecting Device Reliability
- Case Study: APs Fail to Go Online or Ping Packets Are Lost Due to Poor Network Cable Quality, Incorrect Cable Installation, or Insufficient Optical Fiber Power
- Case Study: PoE Adapters Fail Because APs Are Not Properly Grounded
- Case Study: No Dustproof Measures Are Taken in the Device Installation Environment, Affecting Heat Dissipation
- Case Study: Lightning Strike Occurs on an AP Due to a Lack of Surge Protectors
- Case Study: Water Enters an AP Because the AP Is Not Waterproofed
- Case Study: Lack of Heat Dissipation Design During Installation Causes an AP to Fail to Operate Properly Due to High Temperature
- Case Study: An AP Is Damaged Due to Electric Leakage in the Installation Environment
- Case Study: Wall Plate APs Are Not Mounted on Walls and Repeatedly Restart Due to Overheat
- Case Study: PoE Injectors Are Damaged Due to Improper Installation
- Case Study: Insufficient Power Supply Affects Device Operation
- Case Study: APs Restart Occasionally