Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking for Critical or Major Alarms on an AC
Context
Alarms on an AC are classified into critical, major, minor, warning, indeterminate, and cleared alarms by severity in descending order. The critical and major alarms must be handled immediately.
Check Criteria
No critical or major alarm exists on the device.
Procedure
- Log in to the web system and click Console on the upper right corner to display the CLI window. Run the display alarm active command to check whether critical or major alarms have been reported.
The alarm format is as follows.
- Handle these alarms according to the Alarm Handling. If alarms cannot be cleared, record fault information and contact your agent or Huawei global service hotline.
- If you have a network management system (NMS), such as eSight, check the alarms on the NMS. For details, see the NMS product documentation.
