Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware FAQs
- How Can I Determine Whether an AP Is Qualified?
- How Long Is the Maximum PoE Power Supply Distance?
- Which Lines Do Huawei APs Use to Support PoE? Idle Lines or Signal Lines?
- What Is the Outdoor Coverage Distance of the AP8030DN and AP8050DN? What Is the Coverage Radius of the AP8130DN and AP8150DN with External Omnidirectional Antennas Connected?
- What Installation Modes Are Supported by Indoor and Outdoor APs? What Are the Recommended Installation Heights?
- What Are the Requirements for Pole Dimensions When an Outdoor AP Is Installed on a Pole?
- What Is the Ethernet Cable Length Required for AP Installation?
- Why An Outdoor AP Must Be Grounded?
- How Are Antennas Classified? Which Antennas Are Often Used by Huawei?
- Which WLAN Components Are Commonly Used?
- Can Antennas Amplify Signals?
- What Is Antenna Coverage?
- Is the Antenna Gain Determined During Production? Can the Antenna Gain Be Adjusted?
- What Are Requirements on a Multi-band Combiner?
- Which Passive Components Are Commonly Used?
- What Are the Antenna Tilt, Beamwidth, and Half-Power Beamwidth?
- In Which Scenario Does the Indoor AP Apply To?
- In Which Scenario Does the Outdoor AP Apply To?
- What Are the Requirements for the Pole Dimensions When an Antenna Is Installed on a Pole?
- How Do I Determine the Feeder Length When Installing Antennas?
- What Are the Azimuth and Downtilt of Directional Antennas?
- What Are the Differences Between Dual-Polarized and Single-Polarized Antennas?
- How Do I Select Outdoor Large-Gain Antennas for Transmission and Relay?
- How Do I Calculate AP Power?
- Method for Identifying a PoE Power Supply Failure Caused by High Network Cable Resistance