Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Collect Statistics on APs' Failures to Get Online?
Check the AP status on an AC.
- Check the AP status.
display ap all (Check whether the AP is in Normal state.)
- On the DHCP server, check whether the AP obtains an IP address. If so, ping the IP address of the AP.
display ip pool { interface interface-pool-name | name ip-pool-name } used - Check whether the number of APs exceeds the license specifications (in V200R005 and earlier versions).
display ap-license
- Check whether AP authentication succeeds.
display unauthorized-ap record
- Check whether the MAC address and SN of the AP conflict with those of other APs or are incorrectly set.
display ap id ap-id
Collect trace information on the AC.
[AC6605] trace enable [AC6605] trace object mac-address 148f-c661-b424 (148f-c661-b424 sta MAC) [AC6605]display trace object Trace Object: ------------------------------------------------------------ Object ID : 0 Slot : - MAC Address : 148f-c661-b424 Output : command line ( User-Intf 129 ) ------------------------------------------------------------
Disable trace after required information is collected.
[AC6605] undo trace enable
