Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Test Environment
Radio interference in the test environment should be as low as possible, so a shield room is recommended.
If there is no shielded room, it is recommended that a radio scanning tool be used to select a channel with little interference for the test. If interference of common channels is high, select radar channels for the test.
Keep the test terminal (for example, a laptop) close to the AP. Place the AP vertically, facing the top cover of the laptop. The distance between the AP and laptop ranges from 20 cm to 1 m, ensuring an RSSI of about –35 dBm for the laptop.
