Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
STA Experience FAQs
- How Can I Calculate the Link Setup Rate of the Wi-Fi Air Interface?
- What Are the Maximum Link Setup Rate, Real-time Packet Sending Rate, and Bandwidth of a STA?
- What Are the Physical Rate, Theoretical Rate, and Actual STA Rate in the 802.11 Standard?
- Is the WLAN Rate the Upstream or Downstream Rate?
- Why Is the Association Rate Displayed on Wireless Terminals Low?
- Does an Online 802.11b/g Terminal Affect the Rate of an Online 802.11n Terminal?
- Does BT Download Occupy High Bandwidth and Reduce WLAN Efficiency?
- What Measures Can Be Taken If the Network Access Rate Is Low Due to Weak WLAN Signal Strength?
- STA Receives Strong Signals from an AP, But the Network Speed Is Slow. How Can I Locate the Problem?
- How Do I Configure Multicast Packet Suppression to Reduce Impact of a Large Number of Low-Rate Multicast Packets on the Wireless Network?
- How Do I Configure Wireless User Isolation?
- How Can I Separate Two STAs that Connect to the Same AP and SSID?
- What Is the Roaming Mechanism of APs?
- What Roaming Types Are Supported by WLAN Devices?
- Is Reauthentication or Re-login Required for a STA During STA Roaming? Do the STA's Subnet Properties (Including the IP Address, Home VLAN, ACL, and Priority) Change?
- Why Is the Channel Switching Sometimes Slow During STA Roaming? How Can I Improve the Roaming Sensitivity of a Wireless NIC?
- Why Does Roaming Fail in Direct Forwarding Mode After IPSG Is Configured on a GE Port?
- Why Did STA Fail to Search 802.11n Signals After the AP Is Enabled with 802.11n?
- I Bought a Wi-Fi NIC That Is Claimed to Comply With 802.11a/b/g/n. Why Are 5 GHz AP Signals (AP Working on Channel 149) Not Detected Using This NIC?
- How Can I Collect Statistics on User Service Interruption?
- What Terminal Types Can Be Identified Using the Terminal Type Identification Function? How Can I View Information About the Identified Terminals?
- Why Is the Signal Strength That a STA Receives from an AP Weak?
- How Can a WLAN Network Be Optimized?
- Is There Interference Between Antennas of an Indoor Distributed AP?
- In a Student Dormitory Building with Indoor Distributed APs Deployed, Internet Users Encounter Video Pauses or Slow Network Access Rates in Peak Hours. Why?
- What Methods Does an AP Use to Prevent Interference?
- What Are Interference Sources on WLANs? How Is the Interference Strength?
- WLAN Network Planning