Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
STA Onboarding FAQs
- What Are the ESS, BSS, and SSID?
- Why Are STAs Associated with Other APs Than Nearby APs in Multi-AP Scenarios?
- The Laptop Uses the 802.11b/g NIC. How Can I Associate It with a 802.11n AP?
- Why Does a STA Fail to Associate with an AP When WEP and TKIP Encryption Is Configured in 802.11n Mode?
- Can 802.11n Devices Work Only in 802.11n Mode? Can 802.11n Devices Work in 802.11b/g Mode?
- How Can I View Historical Going-Online and Going-Offline Records of a STA on the AC?
- How Can I Check that a STA Successfully Connects to the WLAN?
- Does a STA Blacklist Force STAs to Go Offline?
- Why Cannot STA Associate with an AP When WEP Authentication Is Used?
- Why Cannot Users Associate with APs When WPA-PSK Authentication Is Used?
- What Are the Differences in AP-side Switch Interface Configuration and Intermediate Switch Configuration in Direct and Tunnel Forwarding Modes?
- What Are Advantages and Disadvantages of Direct Forwarding and Tunnel Forwarding?
- How Do I Confirm Wireless Parameters of a STA After the STA Associates with an AP?
- Is the Number of Access Users in Dual-band Mode Twice the Number of Access Users in Single-band Mode?
- Are All Traffic Statistics Collected in Local Forwarding Mode?
- Is service data Aggregated on an AC? What Is the Recommended Forwarding Mode and Why?
- How Do I Defend Against Bogus DHCP Servers at the User Side?
- Do I Need to Create a Service VLAN on an AC When the AC Is Deployed in Bypass Mode and Service Data Is Forwarded in Direct Mode?
- Users Have Been Connected and Assigned IP Addresses, but There Is No User Information in the display access-user Command on the AC. Why?
- What Is the Difference Between Direct Forwarding and Tunnel Forwarding During STA Login?
- After iPhones or iPads Running Some Versions (Such as iOS 7.0.4) Associate with an AP, No Signal Bar Is Displayed. How Do I Solve the Problem?
- What Should I Do If iTunes Exits Unexpectedly When User Terminals Obtain Service Information Through iTunes?
- iPhones Cannot Obtain IP Addresses Whereas Other Terminals Can. How Can I Solve This Problem?
- An Apple Terminal Goes Offline After the Screen Is Locked. When the Screen Is Turned On, the Terminal Does Not Automatically Associate with the WLAN. Why?
- Android and Windows Terminals Can Properly Access the Web Server on the Intranet but iOS Terminals Cannot. Why?