After VRRP HSB Is Deployed on ACs, the AP Status on the Active AC Is Normal. Is the AP Status on the Standby AC Automatically Backed Up?

The AP status on the standby AC cannot be automatically backed up on ACs. APs must be added offline on the standby AC; otherwise, the AP status on the standby AC will not switch to standby. Before the active and standby ACs go online, the APs must be imported on the ACs. If an AP goes online on the active AC and then is imported on the standby AC, the status of the AP on the standby AC is fault. In this case, run the undo hsb enable command in the HSB group view on the standby AC to disable HSB, and then run the hsb enable command to enable HSB. After that, information on the active AC is backed up to the standby AC, ensuring information consistency between the active and standby ACs. The AP status on the standby AC will be displayed as standby.