Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
APs Cannot Load the Version File After the ap-update multi-load Command Is Executed. How Can I Locate the Problem?
Locate the problem as follows:
- Check whether the version files stored in active and standby partitions of the flash memory are the same as version files to be loaded. The version files are loaded only when the version files stored in active and standby partitions of the flash memory are different from version files to be loaded.
- In FTP or SFTP upgrade mode, check whether the file name and path are correct.