Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Others
- What Is the Function of a WLAN AC Source or CAPWAP Source?
- Why Is Displayed Radio Member Traffic Information Inaccurate?
- What Are the Requirements for a Radio to Join a Load Balancing Group?
- How Is a BSSID Generated? (V200R005C10 and Earlier Versions)
- What Are the Timeout Mechanism of CAPWAP Link and Timeout Period Calculation?
- Does Huawei Provide a Comprehensive Solution for Managing APs of Different Manufacturers?
- What Is the Function of the WLAN QoS Profile?
- What Is the Difference Between the WMM Mandatory Switch and WMM Function Switch?
- Is the Scanned Air Port MAC Address of the SSID Sent by Huawei APs in Multicast Mode the Same as the AP's MAC Address?
- Why Does a Manually Configured Radio Channel Not Take Effect?
- After an 802.3at AP in V200R008C10 Is Connected to a Switch in V200R001, V200R002, or V200R003, the AP Works in 802.3af Mode. How Can I Enable the AP to Work in 802.3at Mode?
- Why No Data Is Displayed on the AP Spectrum Chart?
- What Are the Differences Between Wi-Fi Tag Location and Terminal Location?
- Do Channel and Power Changes Cause Service Interruption on STAs During Automatic Radio Calibration?
- How Do I Check the MAC Address of a WLAN Device?
- Can a Root Node on a WDS Network Send Signals of WDS VAPs and Service VAPs at the Same Time?
- How Do I Save Logs to the Log System?
- How Can I Obtain the Paibo terminal location Plug-in and Related Documentation?
- How Can I Obtain the Surfilter terminal location Plug-in and Related Documentation?
- What Are the Differences Between CA, Local, and Self-Signed Certificates?
- Which Certificate Formats Are Supported?
- How Do I Manually Import Certificates and an RSA Key Pair?
- How Do I Set Parameters Such as the CIR and CBS When Configuring Rate Limiting?
Previous
