Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Determine the Feeder Length When Installing Antennas?
Determine the installation position of antennas based on the Line of Sight (LOS), and the installation position of APs based on power supply modes, data to be transmitted, and environmental conditions. Determine the feeder length according to the distance between APs and antennas.
The longer the feeder, the weaker the signal strength within the antenna coverage scope. Use feeders as short as possible to connect antennas and APs.
The required bend radius of radio cables is as follows: RG-8U feeders longer than 150 mm, 1/2-inch feeders longer than 50 mm, and 7/8-inch feeders longer than 250 mm. (1 inch = 25.4 mm.)