Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Is a Faulty AP Still in Normal State on eSight and eSight Receives No Alarm?
Check whether the following commands are performed.
[AC] snmp-agent target-host trap-hostname xxx address x.x.x.x udp-port 162 trap-paramsname public [AC] snmp-agent target-host trap-paramsname public v2c securityname public [AC] snmp-agent trap source Vlanif100 [AC] snmp-agent trap enable