Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The Transmit Power of an Optical Module Is Low
Use an optical power meter to test the transmit power of an optical module. If the transmit power is too low, locate possible causes as follows:
- Check whether the optical port on the optical module is contaminated, for example, by dust. If so, clean the optical module. Then test whether the transmit power of the optical module is recovered to normal. Cover idle optical modules with dust caps.
- If the fault persists, the optical module is faulty. Return and repair the optical module.
