Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Case Study: AP5030DN Upgrade and Mode Switching Are Abnormal Because the AP5030DN Enters the Assistant Package Mode
Symptom
An exception occurs when an AP5030DN is switched from Fit V200R006C10SPCb00 to Fat V200R007C20SPC700.
Relevant Alarms and Logs
None
Cause Analysis
The assistant package mode is used here. You need to continue to perform the upgrade in the system view of the assistant package to complete the upgrade.
Procedure
- Complete the upgrade operations.
AP# upgrade version tftp FatAP5X30XN_V200R007C20SPC700.bin 192.168.253.2 69 Info: Upgrade successfully! AP# reboot
Suggestion and Summary
If the AP enters the assistant package mode after an upgrade failure, run the upgrade commands to complete the upgrade.