Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Cables Cannot Be Tightly Inserted into Ethernet Ports
- Replace the RJ45 connectors to check whether the RJ45 connectors in use are standard. If not, advise the customer to use standard RJ45 connectors. (It is recommended that several RJ45 cables are used for onsite cross tests.)
- If the fault persists, insert the RJ45 connectors into other devices to check whether the connectors can be tightly inserted into Ethernet ports.
- If the RJ45 connectors can be tightly inserted into Ethernet ports on other devices, the fault is related to the connector on the device. Contact technical support personnel.
