Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAQ: What Can I Do If an AP Fails to Detect Surrounding Bluetooth Signals and the Management SSID?
For Fit APs and cloud APs, the Bluetooth serial port and management SSID functions are automatically disabled after APs go online by default. When an AP goes offline, the Bluetooth serial port and management SSID functions are enabled again.
You can run the console ble-mode persistent command on the AC or leader AP to configure the Bluetooth serial port function of the target Fit AP to be always enabled.