Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Up a Performance Test Network
Set up a performance test network according to the network diagram in Figure 13-1.
The core part of a performance test is the radio environment between an AP and a traffic simulation client. The client communicates with the AP through radio signals. Service traffic flows from the client to the AP, and reaches the uplink traffic simulation server.
Based on the test networking diagram and AP performance data, factors that affect performance include the device under test (DUT) and its configuration, radio environment, AP performance, wired network, and server performance and configuration.
During the test, if performance fails to reach the expected result, see Performance Troubleshooting to rectify the fault.
